ST STM32 User Manual

UM1974 Rev 9 83/85
UM1974 Revision history
84
Revision history
Table 25. Document revision history
Date Revision Changes
21-Dec-2015 1 Initial version.
20-May-2016 2
Updated Introduction, Section 6.13: Extension connectors,
Section 6.14: ST Zio connectors to add NUCLEO-F767ZI.
08-Jul-2016 3
Updated Introduction, Section 3: Ordering information,
Section 6.11: Ethernet, Section 6.12: Solder bridges,
Section 6.13: Extension connectors, Section 6.14: ST Zio
connectors, Section 6.15: ST morpho connector to add
NUCLEO-F412ZG.
28-Nov-2016 4
Updated Introduction, Section 3: Ordering information,
Section 6.11: Ethernet, Section 6.12: Solder bridges,
Section 6.13: Extension connectors, Section 6.14: ST Zio
connectors, Section 6.15: ST morpho connector to add
NUCLEO-F413ZH.
19-Jan-2017 5
Updated Introduction, Section 3: Ordering information,
Section 6.11: Ethernet, Section 6.12: Solder bridges,
Section 6.13: Extension connectors, Section 6.14: ST Zio
connectors, Section 6.15: ST morpho connector to add
NUCLEO-F722ZE.
14-Apr-2017 6
Updated Introduction, Section 3: Ordering information and
Table 12: Solder bridges to add NUCLEO-H743ZI.
15-Dec-2017 7
Expanded document scope to the NUCLEO-F439ZI and
NUCLEO-F756ZG products:
– Updated Introduction, Features, Product marking and
Ordering information
– Updated Figure 11, Table 13, Table 17 and Table 21

ST STM32 Specifications

General

Series	STM32
Category	Microcontrollers
Core	ARM Cortex-M0, Cortex-M0+, Cortex-M3, Cortex-M4, Cortex-M7, Cortex-M33
Clock Speed	Up to 480 MHz
GPIO Pins	Up to 144
Communication Interfaces	I2C, SPI, USART, USB, CAN, Ethernet
Package Types	LQFP, BGA, WLCSP
ADC Resolution	12-bit, 16-bit (varies by series)
DAC Resolution	12-bit (varies by series)
Operating Temperature	-40°C to +85°C or +105°C