ST STM32F103 series User Manual

October 2007 Rev 1 1/14
UM0462
User manual
STM32F101xx and STM32F103xx
Flash loader demonstrator
Introduction
The purpose of this document is to describe the STMicroelectronics STM32F101xx and
STM32F103xx Flash loader demonstrator application that was developed to illustrate the
System Memory bootloader capabilities.
This document details the prerequested hardware and software environments, as well as
the use cases of the demonstrator software.
www.st.com

ST STM32F103 series Specifications

General

Series	STM32F103
Core	ARM Cortex-M3
Clock Speed	Up to 72 MHz
GPIO Pins	Up to 80
Operating Voltage	2.0 V to 3.6 V
ADC	12-bit
DAC Resolution	12-bit (on select models)
Communication Interfaces	I2C, SPI, USART, USB, CAN
Operating Temperature	-40°C to +85°C
Package Options	BGA, LQFP

Summary

Introduction to Flash Loader Demonstrator

Getting Started with Flash Loader

Package Contents

Details the software and hardware items included in the demonstrator package.

System Requirements

Specifies the Windows OS versions and COM port requirements for the tool.

Flash Loader Demonstrator Installation

Guides through the installation process for the demonstrator software and hardware.

User Interface Description

Welcome Window

The initial screen of the wizard application, guiding the user through the process.

Connection Settings

Configuration screen for selecting communication port and UART settings.

Device Information

Displays available device information and target selection for the demonstrator.

Operation Choice

Screen to select the operation (Erase, Download, Upload) and set parameters.

Operation Progress

Shows the status of the download or upload operation, including percentage and time.

Document Revision History