ST7735R
V0.2 100 2009-08-05
10.1.17 DISPOFF (28h): Display Off
28H DISPOFF (Display Off)
Inst / Para
D/CX
WRX
RDX
D17-8
D7 D6 D5 D4 D3 D2 D1 D0 HEX
DISPOFF
0 ↑ 1 - 0 0 1 0 1 0 0 0 (28h)
Parameter No Parameter -
Description
- This command is used to enter into DISPLAY OFF mode. In this mode, the output from Frame Memory is
disabled and blank page inserted.
- This command makes no change of contents of frame memory.
- This command does not change any other status.
- There will be no abnormal visible effect on the display.
- Exit from this command by Display On (29h)
Default
Status Default Value
Power On Sequence Display off
S/W Reset Display off
H/W Reset Display off
Flow Chart
(Example)
Memory Display
To Next Page
Loading...
