ST STM32L4 - Page 108

Change the default WiFi Credentials
• Type your responses to questions as follows:
• Press Enter after each response
1. Do you want to change them?(y/n)?
y
2. Do you want to read them from NFC?(y/n)
n
3. Enter the SSID:
stm32iot
4. Enter the PassWd:
stm32iot
5. Enter the encryption mode (0:open, 1:WEP,
2:WPA/WPA2-Personal):
2
108
Note: You cannot use backspace or delete if you make a typo;
in that case, press reset, then blue button and start over.