VL53L1X GUI : HOW TO
• Download from st.com searching for “STSW-IMG008”
• Run the installer with Admin privileges
• PC Graphical User Interface to
• Display (in live) key ranging data (distance, signal rate)
• Change key parameters of VL53L1X
• Perform calibration phases (offset and xTalk with cover glass)
• Get data logging (.csv file)
• GUI is running on the PC connected to a P-NUCLEO-53L1A1 pack
• Flash FW to Nucleo board
• Start ranging and data will be transferred via USB to COM and display it in GUI
• It supports following OS.
• Windows 7
• Windows 8
• Windows 10 (run as an admin must)
16
To Next Page
Loading...
