Stack-On Sentinel GCWB-18

To Next Page

40141-2109

Portable Case

Instructions

GCWB-18

PARTS INCLUDED

Serial #:

Key #:

WARNING

Tip Over Hazard

A child or adult can tip the cabinet and be killed or

seriously injured.

Failure to secure the cabinet as shown in these

instructions can result in death or serious injury to

children and adults.

Children should not play with or around the

cabinet at any time.

Record the key number and serial number from the back of the cabinet.

Keep keys in a secure place away from children.

Do not store this document in the cabinet

IMPORTANT:

Tools Required:

Phillips screwdriver

7/16” wrench

drill

3/16” drill bit

Scizzors

Hardware included:

(22) 8-32 x 1/2 machine screw

(22) 8-32 nut

(12) 8 x 1/2 screw

FOAM PAD FOR BOTTOM

(QUANTITY 1)

FOAM FOR SHELF

(QUANTITY 4)

FOAM FOR TOP SHELF

(QUANTITY 1)

SHELF

(QUANTITY 4)

TOP SHELF

(QUANTITY 1)

CENTER PARTITION

(QUANTITY 1)

PARTS INCLUDED

PLASTIC PLUG

(QUANTITY 2)

SCOPE REST

(QUANTITY 4)

5-POSITION BARREL REST

(QUANTITY 2)

4-POSITION BARREL REST

(QUANTITY 2)

PLANNING YOUR CABINET CONFIGURATION

Before assembling your cabinet, review the following

storage options this cabinet provides. Choose the options

that best suit your storage needs.

You will need to assemble all internal components before

mounting the cabinet to the wall and floor.

The partition and the

top shelf create the

structure for the left

and right storage

compartments in this

cabinet. The space

behind the top shelf

provides clearance

for longer gun

barrels.

WARNING: This product can expose you to chemicals

including Di(2-ethylhexyl)phthalate (DEHP) which is known

to the State of California to cause cancer and birth defects

or other reproductive harm. For more information go to

www.P65Warnings.ca.gov

For warranty and customer support, please register this

product at www.stack-on.com/product-registration

Need help?

Do you have a question about the Stack-On Sentinel GCWB-18 and is the answer not in the manual?

Summary

Assembly Preparation and Safety

Safety Warnings

Critical safety information regarding tip-over hazards and chemical exposure.

Parts and Tools Overview

Lists all components and tools required for cabinet assembly and planning.

Cabinet Configuration Planning

Guidance on planning storage options and internal component assembly.

Barrel Rest Installation

Installing Barrel Rests

Steps for installing 4-position and 5-position barrel rests to cabinet interior walls.

Shelf and Partition Installation

Center Partition and Shelf Mounting

Instructions for assembling the center partition and mounting shelves at chosen locations.

Cabinet Mounting and Placement

Mounting and Securing the Cabinet

Essential steps for securely mounting the cabinet to wall studs and the floor.

Selecting Installation Location

Recommendations for choosing a safe, secure, and level location for cabinet installation.

Internal Component and Accessory Installation

Foam and Scope Stand-Off Installation

Instructions for placing protective foam and installing scope stand-offs.

Product Warranty Information

One Year Limited Warranty Details

Information on the product's one-year warranty, coverage, and limitations.