Stack-On SS-10-MG-C - User Manual

HOW TO LOCK
1. Close the door.
2. Turn the handle to the locked position.
3. Turn the dial either direction a few rounds.
1st
70
50
30
3 times twice once
2nd
3rd
Example: If the dial combination numbers were 70 - 50 - 30
1. Turn the Dial clockwise passing the rst
combination number twice landing on the
number the third time.
2. Now turn the Dial counterclockwise, passing the
second combination number once landing on
the number on the next time around.
3. Turn the Dial clockwise until you reach the third
combination number.
4. e handle should now be released. Turn the
handle clockwise. Pull the door towards you.
All numbers must be dialed exactly. If you pass a
number, you can not back up. You must start over.
All numbers are to be dialed to the Top Notch located
on top of the dial ring (the 12 o'clock position).
Your Combination Number
1st
3 times (R)
2nd
2 times (L)
3rd
1 time (R)
40247-1312
1
15
SAFE COMBINATION INSTRUCTIONS
Serial #
• Keep this record of your combination in a
secure place away from children.
• Do not store this document in the safe.
NOTE: You can store your Serial # and Combination
on Stack-On’s SECURE web site –
www.stack-on.com under Customer Service.
Storing your Combination will provide instant access
to this important information should you ever lose
your combination.
Only you will have access to this information.
WARNING
Tip Over Hazard
A child or adult can tip the safe and
be killed or seriously injured.
Failure to secure the safe as shown in
these instructions can result in death
or serious injury to children and adults.
Children should not play with or
around the safe at any time.
• Warning: Keep your safe closed and
locked at all times when not in use. Children
could accidentally be locked inside the safe.
• Do not move this safe using its handle. The
handle should only be used for opening and
closing the door of the safe.
• Record the serial number from the tag on the
back of the safe or from the tag on the front
bottom corner of the safe.
IMPORTANT:
Instructions
SS-22-MG-C
SS-22-MB-C
SS-16-MG-C
SS-16-MB-C
SS-10-MG-C
SS-8-MG-C
®
Hardware Included:
(2) M10x70 Lag screws
(2) washers
(2) plastic anchors
Tools required:
drill
7/16” drill bit
3/8” drill bit
17mm socket wrench
Phillips screwdriver.

Summary

Safe Operation and Combination Instructions

Safe Combination Instructions

Detailed steps for dialing the safe combination, including passing numbers and landing positions.

How to Lock the Safe

Procedure for securing the safe door after use, involving handle and dial manipulation.

Installation and Securing

Selecting a Location

Guidelines for choosing a safe, flat, and secure mounting location adjacent to a wall.

Securing the Safe

Instructions for mounting the safe to the floor using provided hardware or suitable fasteners.

Internal Components and Support

Installation of Scope Stand-Off

Instructions for installing the scope stand-off into the barrel rest for gun combinations.

Shelves and Door Organizer Adjustment

Guidance on installing adjustable shelving and relocating the top tray of the door organizer.

Combination Retrieval and Warranty

Combination Request Form

Form and procedure for obtaining a lost combination, requiring proof of ownership and payment.

Limited Three Year Warranty

Details the warranty coverage, exclusions, and limitations for Stack-On Steel Safes.

Stack-On SS-10-MG-C Specifications

General

Brand	Stack-On
Model	SS-10-MG-C
Category	Safes
Language	English