ST215 User Handbook Page
9
Cooling
Upon completion of firing the ST215 lights all lamps on the mimic display and
the kiln is allowed to cool naturally.
While the kiln temperature is above 40°C the display alternates every 5 sec-
onds between the kiln temperature and HOt.
When the kiln has cooled to less than 40°C the display alternates every 5
seconds between the kiln temperature and End.
To return the ST215 back to idle condition ready for the next firing press the
►n key (or turn off the power to the instrument).
To Next Page
Loading...
Need help?
General