Need help?Do you have a question about the Stagg EcoPar36 and is the answer not in the manual?
Configure the fixture's DMX address for lighting control.
Select between 4 or 8 DMX channel modes for operation.
Set the fixture as master or slave for synchronized operation.
Choose operational modes like FADE, SOUN, Auto, or COLOR.
Invert the display orientation for better viewing angles.
Adjust color balance and temperature for desired output.
Manually control individual color channels and effects.
Initiate an automatic test sequence to check functionality.
View the total operating hours of the fixture.
Display the current operating temperature in Celsius.
General| Power Consumption | 36W |
|---|---|
| Beam Angle | 25° |
| Color Mixing | RGB |
| Type | LED Par Light |
| Power Source | AC100-240V, 50/60Hz |
| LEDs | 36 x 1W LEDs (12x Red, 12x Green, 12x Blue) |
| Control Modes | DMX, Master/Slave |
| DMX Channels | 6 |
To Next Page