Stagg EcoPar36 - Reverse the display; Balance; Manual mode; Auto-test

Reverse the display
With the menu button, select the disp mode and press the enter key to confirm.
Then use the up and down buttons to choose the display mode, that is dISP (up)
dSIP (down), and press the enter key to confirm. Press the menu button to
return to the main menu.
Balance
With the menu button, select the BALA mode and press the enter key to confirm.
Then use the up and down buttons to select the desired colour, that is rEd (red),
GrEE (green) or bLue (blue), and press the enter key to confirm.
Then use the up and down buttons to select a value between 125 and 255 (which
determine the colour temperature) and press the enter key to confirm. Press the
menu button to return to the main menu.
Manual mode
With the menu button, select the manual mode and press the enter key to confirm.
Then use the up and down buttons to choose the desired colour, that is rEd (red),
GrEE (green), bLue (blue), UhIt (white), Anbe (amber), uV (ultraviolet), and press the
enter key to confirm. Then use the up and down buttons to select the desired colour
(between 0 and 255). The chosen colour will automatically be displayed. Press the
menu button to return to the main menu.
Auto-test
With the menu button, select the Test mode and press the enter key to confirm.
The machine will automatically start to diffuse colours. Press the menu button
to return to the main menu.