Max Tilt Rotation Setup
• Press MENU, then Up or DOWN until “TIxx“ is displayed, then press ENTER
• You can reduce the maximum vertical rotation range to 270° (TI27), 180°
(TI18) or 90° (TI09) using the UP or DOWN buttons, press ENTER to confirm.
.
Reset
• Press MENU, then UP or DOWN until "REST" is displayed, then press
ENTER
• The unit will reboot and perform a self-test program testing all the features
individually.
Reset Factory Settings
• Press MENU, then UP or DOWN until "LOAD" is displayed, then press
ENTER
• The unit will reboot and load factory settings.
IMPORTANT SAFETY INSTRUCTIONS
READ AND KEEP THESE INSTRUCTIONS. HEED ALL WARNINGS.
• If, after you have followed the instructions outlined above, this device fails to function, please
contact your dealer. Under no circumstances should this device be opened. Leave all servicing to
qualified personnel.
• Electrical appliances must never be used in conditions of high humidity or heat. To prevent any risk
of fire or electric shock, never spill or splash liquids on this device. Should this happen, unplug the
power cable from the mains outlet and switch off the unit immediately.
MARKING & CONFORMITY
1. The CE mark on this product means it conforms to the EMC Directive (2004/108/CE), CE marking
Directive (93/68/EEC) and Low Voltage Directive (2006/95/EC).
2. The «Crossed-out Wheeled Bin» is to draw your attention to the WEEE (Waste Electric &
Electronic Equipment) Directive (2002/96/EC). It means this apparatus must be collected separately
for recycling.
3. «RoHS compliant» means this device conforms to the Directive (2002/95EC) on the restriction of
the use of certain hazardous substances in electrical and electronic equipment, such as: Mercury,
Lead, Cadmium, Hexavalent Chromium, Polybrominated Buphenyl (PBB) and Polybrominated
Diphenyl Ethers (PBDE).
To Previous Page
Loading...
