1. BEFORE USAGE
This package contains
• 1x HeadBanger 10 MK3
• 1x Power Cable
• 1x User Manual
Unpacking
• Thank you for purchasing this product, it has been thoroughly tested
and has been shipped in perfect operating condition.
• Carefully check the packaging for damage that may have occurred during
shipping.
• If the packaging appears to be damaged, carefully inspect your fixture
for any damage and be sure all equipment necessary to operate the unit has
arrived intact.
• If damage has been found or parts are missing, please contact your vendor or
our customer support number for further instructions.
Introduction
• This fixture can operate in six different operating modes: DMX control, sound
active, automatic, manual setup, infrared remote control or in a Master/Slave
configuration
• This product comes with several built-in programs that can be used while
operating as a single unit or with multiple units linked in a master/slave
configuration
• For best results use fog or special effects smoke to enhance the beam
projection
• Warning! To prevent or reduce the risk of electrical shock or fire, do not
To Next Page
Loading...
