!
white manually. Select “AtF”, press ENTER; “rxxx” “Gxxx” “bxxx” or “Uxxx” will be
displayed. You can then adjust it between 1-255, press ENTER; you can mix
other colours by pressing UP or DOWN to adjust it.
Chan - This menu will let you select your desired DMX Channel mode.
1. Tap the MENU button and UP button or DOWN button until “Chan”
is displayed, press ENTER.
2. “X Ch” will now be displayed, “X” represents the displayed DMX channel
mode. Press the UP or DOWN button to choose your desired Channel mode.
Soun - This menu will let you select your desired sound mode
1. Tap the MENU button until “Soun” is displayed, then press ENTER.
2. “Soux” will now be displayed. You can confirm two modes by pressing UP or
DOWN for sound mode.
3. Tap “ENTER” again, the display will show “SL-XX”, then you can adjust sound
sensitivity from 0-9 by pressing “UP” and “DOWN”
SLav- This menu will let you select your desired Master/slave mode
1. Tap the MENU button until “SLav” is displayed, then press ENTER.
2. “Sla ” will now be displayed; Slave mode is confirmed. It will be slaved by auto
mode, sound mode and colour mode.
VER - This will display the software version
1. Tap the MENU button until “VER” is displayed. Press the ENTER button and
the software version will be displayed.
2. Press the MENU button to leave this function.
DMX control
This will allow you to control each individual fixture trait with a standard DMX-512
controller such as the Stagg Commandor series.
Creating unique programs tailored to your individual needs.
To Next Page
Loading...