Stagg SLI FLATSET1 - User Manual

!
User Manual
FLATSET
SLI-FLATSET1

Summary

Product Features

On Board System Menu

Addr - DMX Address Setting

Set DMX address via control board by pressing UP or DOWN.

Auto - Select Auto Mode

Select desired auto mode and confirm by pressing UP or DOWN.

ChAS - Select Chase Mode

Select desired chase mode and set speed (1-9).

Colo - Select Colour Mode

Select static colour or 'AtF' mode, adjust RGB brightness.

Chnd - Select DMX Channel Mode

Select DMX channel mode by pressing UP or DOWN.

SLav - Select Master;Slave Mode

Select Master/Slave mode by pressing MENU until 'SLav' then ENTER.

VER - Display Software Version

Display software version by pressing MENU until 'VER' then ENTER.

Foot Controller System Menu

DMX Control Mode

Control individual fixture traits using a standard DMX-512 controller.

Universal DMX Control

Use DMX-512 controller for head movement and custom program creation.

DMX Value and Function

Five-Channel Mode

Details DMX channel values and functions for the five-channel mode.

Fourteen-Channel Mode

Details DMX channel values and functions for the fourteen-channel mode.

Important Safety Instructions

Marking & Conformity

Information on CE mark, WEEE Directive, and RoHS compliance.

Stagg SLI FLATSET1 Specifications

General

Power	50W
Beam Angle	25°
Dimming	0-100%
Input Voltage	100-240V AC, 50/60Hz
Housing Material	Aluminum
DMX Channels	6
Operating Modes	DMX, Auto, Sound
Connectors	DMX In/Out
LED Colors	RGB