INSTALLATION
The unit should be mounted via its screw holes. Always ensure that the unit is firmly
fixed to avoid vibration and slipping while operating. Always ensure that the structure
to which you are attaching the unit is secure and able to support 10 times the unit’s
weight. Also, always use a safety cable that can hold 12 times the unit’s weight when
installing the fixture.
The equipment must be fixed in an appropriate place by professionals. Keep it out of
the reach of unqualified people.
TECHNICAL SPECIFICATIONS
Truss lighting with 3 x 4-watts (4 in 1) LED
- LED: 3 x 4 watts
- Illuminance: 1866 lux at 2 metres (96,6')
- Beam angle: 30°
- Protocol: DMX-512 (4, 6 or 8 channels)
- Functions: Dimmer (0-100 %), strobe (0-20 Hz), auto, sound control,
master/slave, remote control
- Remote control included
- Display: 4-digit
- Housing: Metal
- Fixing: 3 x M10 and 1 x M12 threaded holes
- Input and output: 3-pin DMX and IEC in and out
- Cooling: Low-noise fan
- Use: Indoor
- Power consumption: 80 watts
- Dimensions: 10.8 x 10.8 x 10.4 cm (4.3 x 4.3 x 4.1")
- Weight: 0.6 kg (1.3 lb)
To Next Page
Loading...
