Need help?Do you have a question about the Stahl ST 5025-6/1,5 Series and is the answer not in the manual?
General| Brand | Stahl |
|---|---|
| Model | ST 5025-6/1, 5 Series |
| Category | Chain Hoists |
| Language | English |
General product information for ST chain hoists, including capacity range.
Explanation of symbols used in the product documentation for clear understanding.
Explanation of the type designation system for ST chain hoists.
Details on the standard program of ST chain hoists, including selection tables.
Information on STD dual chain hoists, including selection tables and features.
Information on STB Big Bag design chain hoists and their selection tables.
Information on STK extra short headroom trolleys and their selection tables.
Information on ST...W 1~AC chain hoists for single-phase AC supply and their selection tables.
Information on STV hoists for entertainment industry and their selection tables.
Overview of available equipment, options, and features for ST chain hoists.
Standard control features for ST chain hoists, including main contactor and emergency stop.
An overview of the new ST chain hoist program, covering capacity range and key features.
Detailed features of the new ST chain hoists, emphasizing safety, maintenance, and handling.
Detailed selection tables for the standard ST chain hoist program by model and capacity.
Benefit of STD dual chain hoists: lifting long goods without tilting.
Available motor supply voltages for chain hoists, including standard and optional options.
Standard control features for ST chain hoists, including main contactor and emergency stop.
Gear limit switch functions for operational cut-off and speed switching.
Travel limit switch for trolley cross travel, requires separate order and contactor control.
Contactor control option for crane manufacturers without main contactor/transformer.
Direct control option for ST chain hoists up to ST 20, with EMERGENCY STOP.
One-handed control pendant for stationary hoists and trolleys, ergonomic design.
Option to omit standard contactor control and pendant for chain hoists.
Operational hoist limit switch options for top/bottom hook positions and various hoist types.
Combinations of supply and control voltages available for contactor controls.
Electronic device for checking and adjusting slipping clutch settings for 4-11mm chains.
Brake module required for direct control systems when using ST 10-ST 60.
Adjusting device for slipping clutch to set permissible tractive force without test weight.
Technical data for hoist motors including power, duty cycle, speeds, and connection fuses.
Maximum cable lengths for direct control based on motor type and voltage.
Wheel load data for standard program hoists and trolleys, with formulas for calculation.
Wheel load data for STK extra short headroom trolleys, with calculation formulas.
Maximum cable lengths for contactor control based on motor type and voltage.
Explanation of microslip in ST 10-ST 60 hoists, preventing clutch sticking and ensuring constant reaction torque.
Details on the second brake (bypass brake) function and its role in safety and eliminating microslip.
Illustrations of various stationary hoist designs and their possible mounting configurations.
To Next Page