To Next Page
B
Bonnie HowardSep 12, 2025
What to do if Stahl Industrial Equipment is not used for its intended use?
- HhudsondavidSep 12, 2025
If the device is not being used as intended, it must be taken out of operation.
What to do if Stahl Industrial Equipment is not used for its intended use?
If the device is not being used as intended, it must be taken out of operation.
What to do if permissible ambient temperature is exceeded for Stahl Industrial Equipment?
If the permissible ambient temperature is exceeded or falls below the limit, the device must be taken out of operation.
General| Category | Security System |
|---|---|
| Operating Temperature | -40 °C to +60 °C |
| Optical Zoom | 30x |
| Video Compression | H.264, H.265, MJPEG |
| Certifications | ATEX, IECEx |
| Enclosure Material | Stainless Steel |
| Ingress Protection | IP68 |
| Image Sensor | 1/2.8" CMOS |
| Resolution | 1920 x 1080 (Full HD) |
| Protocols | TCP/IP, HTTP, HTTPS, RTSP, RTP, UDP, ONVIF |
| Power Supply | 24 VAC / VDC |
| Voltage | 24 VAC / VDC |
Details the structure and types of warning notes (DANGER, WARNING, CAUTION, NOTE).
Specifies required qualifications for personnel handling the device.
Covers safe use before installation and for mounting/installation procedures.
Warns against unauthorized modifications and their potential consequences.
Safety warnings for mounting, dismounting, and selecting the operating position.
Details safety measures and procedures for making electrical connections.
Explains how to configure the device using DIP switches on the PCB.
Lists audible settings, frequencies, and special applications based on DIP switch configurations.
Provides a step-by-step guide for mounting the device, including screw and seal notes.
Lists essential checks and conditions required before commissioning the device.
Procedures for troubleshooting and information needed when contacting support.
Guidelines for general maintenance, overhaul, and repair procedures.
