Need help?Do you have a question about the Stahlwerk DC WIG TIG 200 and is the answer not in the manual?
General| Input Voltage | 230V |
|---|---|
| Output Current Range | 10-200A |
| Output Current | 200A |
| Type | DC |
| Welding Method | TIG |
| Duty Cycle | 60% |
Highlights potential injuries during welding and cutting operations.
Warns of serious injury or death from electric shock, advising insulation.
Advises avoiding breathing harmful gases and fumes during welding.
Warns about eye damage and skin burns from arc rays, recommending protective gear.
Alerts to fire risk from welding sparks and advises clearing the area.
Warns about hearing damage from excessive noise and recommends ear protection.
Advises contacting experts for installation and operation problems.
Details high efficiency, digital inverter technology, and ease of use.
Explains benefits of the TIG INVERTER series, including material compatibility and HF technology.
Explains how TIG pulse function enhances welding precision and prevents overheating.
Lists key parameters like 2/4 Stroke, Anti Stick, Hot-Start, Lift-Ignition, MMA, ARC-Force.
Details parameters like automatic cooling, gas post flow time, pulsing, and over heat protection.
Identifies controls and displays on the TIG 200 welding machine panel.
Illustrates and describes the connection ports for the TIG 200 model.
Details the panel layout for the TIG 200 Puls welding machine.
Shows connection points for TIG 200 Puls, TIG 300, and TIG 300 Puls models.
Describes the panel controls and indicators for the TIG 300 welding machine.
Details the panel layout and controls for the TIG 300 Puls welding machine.
Instructions for connecting ground clip, TIG tube package, and power.
Guidance on gas cylinder connection, flow rate, and electrode preparation.
Steps for initiating arc and guidelines for filler material selection.
Explains how to use the pulse function toggle switch for different effects.
Diagram and list of components for assembling the TIG torch.
Provides recommended parameters for different sheet thicknesses and materials.
Explains the color codes for tungsten electrodes and their material compatibility.
Steps for setting up the device for MMA welding, including connections.
Presents key specifications for TIG 200/200 Puls and TIG 300/300 Puls models.
To Next Page
