Stahlwille Standard MANOSKOP 721/5 User Manual

EN
28
STAHLWILLE
Standard MANOSKOP
®
721
Service MANOSKOP
®
730
Technical description
All models
MANOSKOP
®
721, 730 are adjustable
torque wrenches with a cut-out, tactile
and audible cut-out signals.
 These torque wrenches have a safety
cut-out mechanism.
 The wrench is set to cut-out at a
certain torque level by setting the
required value on the force-free sliding
scale.
 The setting slide has an automatic
setting fail-safe mechanism.
 The measuring element is a flexible
rod. The flexible rod is not
pretensioned so it is only under tension
from the start to the end of the actual
tightening operation until the wrench
cuts out.
List of contents
Technical description ..................28
Safety instructions ......................32
Operation ....................................35
Maintenance ...............................44
Cleaning .....................................49
Accessories ................................50
Disposal ......................................50

Stahlwille Standard MANOSKOP 721/5 Specifications

General

Type	Torque Wrench
Model	721/5
Standard	DIN EN ISO 6789-2:2017
Torque Range (lbf·ft)	30 - 150 lbf·ft
Drive Size	1/2 inch
Weight (kg)	1.2 kg