Stahlwille Manoskop 730N User Manual

25
STAHLWILLE
Service Manoskop
®
730N
Technical description
The Manoskop
®
730N is an adjustable
torque wrench with cut-out function,
audible and tactile cut-out signals.
• The torque wrench has a safety cut-
out mechanism.
• The cut-out level can be very quickly
and precisely set with little physical
effort by means of a setting knob.
• The required value is secured by
means of a fail-safe mechanism on
the control knob.
• The measuring element is a flexible
rod. The rod is not pre-tensioned and
therefore only under tension from
start to finish of the actual tightening
operation. After use it is not
necessary to reset to the lowest
value.
• As soon as the torque wrench is
released, it is ready for the next job.
• The ergonomically-shaped two-
component handle allows for
comfortable and safe operation. The
correct grip is indicated optically and
tactually.
List of contents
Technical description ................. 25
ã Important safety points .......... 28
Operation ................................... 29
Maintenance............................... 40
Cleaning the Manoskop
®
........... 46
Accessories................................ 46
Disposal ..................................... 47

Stahlwille Manoskop 730N Specifications

General

Type	Torque Wrench
Model	730N
Drive Size	1/2 inch
Accuracy	± 3%
Weight	1.2 kg
Material	Steel
Scale	Nm and lbf·ft

Summary

Technical Description of Manoskop® 730N

Service Manoskop® 730N Features

Details how the Manoskop® 730N is fitted with various insert tools via its square drive.

Important Safety Points for Manoskop® 730N

Intended Purpose and Usage

Defines the correct workshop applications for the Manoskop® 730N and highlights misuse warnings.

Correct Torque Settings and Operation

Additional Safety Considerations

Points to specific safety warnings found in other sections marked with danger symbols.

Basic Operation Guidelines

Provides fundamental instructions for handling and operating the Manoskop® 730N carefully.

Selecting and Using Inserts and Tools

Attaching Insert Tools

Removing Insert Tools

Procedure for safely detaching insert tools from the torque wrench head using specific methods.

Setting Torque Levels

Setting with Black Graduations

Detailed steps for setting torque values using the black main and fine scales.

Setting with Green Scale

Instructions for setting torque values using the green main scale, ignoring fine scale values.

Controlled Counter-Clockwise Tightening

Uncontrolled Loosening Warnings

Addresses uncontrolled loosening of nuts and bolts, warning about potential wrench damage.

Proper Torque Wrench Usage

Maintenance and Accuracy Checks

Checking Cut-out Value Accuracy

Describes the procedure for inspecting and verifying the accuracy of the torque wrench's cut-out mechanism.

Adjusting for Cut-out Value Deviations

Cleaning the Manoskop®

Available Accessories

Lists various insert tools and adaptors compatible with the Manoskop® torque wrench.

Tool Disposal