- 24 -
4100PT Console layout
Up/Down Arrows: Use of the up/down arrows during program selection will
cycle the LED’s through the available programs for selection. Use of the
up/down arrows during data entry will adjust the data for selection.
Use of the up/down arrows during any program will adjust the intensity
level accordingly.
Enter: The
<enter>
key is used to make selections during program selection
and data entry.
Pause/Stop/Resume: To temporarily pause a program, press the
<Stop>
button once. To reset or stop during a program, press the
<Stop>
button a
second time. To resume – press
<enter> or <Quick Start>
and the program
will resume at the point it was interrupted.
To Next Page
Loading...
