- 32 -
Depress one pedal a few inches to advance the drive chain.
Lubricate the newly exposed section of chain. Continue in this
manner until the entire chain is lubricated.
Let the oil soak in for a few minutes. Wipe off the excess
lubricant.
Reinstall the mid cover. Stand on the pedals and keep them on
the floor. Snap the mid cover onto the frame tube. Slide it
forward, making sure the front edge of the mid cover goes under
the top covers. Insert rivet into the base to secure the cover.
NOTE: Use of WD-40 or similar cleaners will greatly reduce
the life of your parts.
To Next Page
Loading...
