EasyManua.ls Logo

Stairs SP Series User Manual

Stairs SP Series
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Installation and Operating Instructions
Borehole Submersible Pumps
Question and Answer IconNeed help?

Do you have a question about the Stairs SP Series and is the answer not in the manual?

Stairs SP Series Specifications

General IconGeneral
BrandStairs
ModelSP Series
CategoryWater Pump
LanguageEnglish

Summary

Delivery and Storage

1.1 Delivery

Procedures for handling and unpacking pumps as received from the factory.

1.2 Storage and Handling

Guidelines for storing pumps, including temperature limits and proper positioning.

1.2.1 Frost Protection

Instructions for protecting pumps from frost during storage.

General Data

2.1 Applications

Details the various uses for STAIRS SP submersible pumps.

2.2 Pumped Liquids

Specifies acceptable liquid types, sand content, and density considerations.

Preparation

3.1 Maximum Liquid Temperature

Defines operating temperature limits for the pump and motor.

Electrical Connection

4.1 General

Safety and regulatory requirements for electrical hookup by authorized personnel.

Pump Installation

5.1 Fitting the Motor to the Pump

Step-by-step instructions for assembling the motor and pump sections.

5.2 Removal and Fitting of Cable Guard

Instructions for managing the pump's cable guard during installation.

5.3 Fitting of Submersible Drop Cable

Guidance on connecting the submersible drop cable to the motor.

5.4 Riser Pipe

Information on riser pipe installation and recommendations for plastic pipes.

5.5 Lowering the Pump

Procedure for carefully lowering the pump into the borehole.

Start-up and Operation

6.1 Start-up

Steps for initial pump activation, including valve settings and rotation check.

Related product manuals