To Next PageTo Next Page
Need help?Do you have a question about the Stairs ST SERIES and is the answer not in the manual?
General| Model | ST SERIES |
|---|---|
| Category | Water Pump |
| Power Source | Electric |
| Material | Cast Iron |
| Max Flow Rate | Varies by model (Please specify the exact model number for precise data) |
| Max Head | Varies by model (Please specify the exact model number for precise data) |
| Inlet Size | Varies by model (Please specify the exact model number for precise data) |
| Outlet Size | Varies by model (Please specify the exact model number for precise data) |
| Motor Power | Varies by model (Please specify the exact model number for precise data) |
| Voltage | Varies by model (Please specify the exact model number for precise data) |
| Frequency | Varies by model (Please specify the exact model number for precise data) |
| Weight | Varies by model (Please specify the exact model number for precise data) |
Guidelines for water quality parameters, bore replenishment rates, and screening.
Step-by-step instructions for connecting the pump to the motor, ensuring proper alignment.
Guidance on selecting and installing drop pipes, considering pressure and torque.
Importance of connecting a safety line to the pump and bore casing.
Recommendations for pump placement relative to water levels and bore bottom.
How to integrate pumps with pressure tanks and controls to manage cycles.
Requirements for wiring, compliance with codes, and professional installation.
How to check and correct the rotation direction for three-phase motors.
Wiring requirements for three-phase motors, including contactors and overloads.
Procedures for correctly earthing pump motors and control equipment.
Steps for the first start-up, including valve operation and monitoring water clarity.
