Assembly and Operational Instructions
2
STEP 1: Unfold the FRONT FRAME(2) from the MAIN FRAME(1) and secure with the
LOCKING KNOB(15). Press the STAND CAPS(3) onto the stabilizers on the
MAIN FRAME(1) and the FRONT FRAME(2).
STEP 2: Bolt the ADJUSTMENT KNOB(14) into the hub on the MAIN FRAME(1).
NOTE: There are two adjustment holes on each side of the PEDAL STRAPS(12).
Select the adjustment holes which allow your feet to be easily removed from
the PEDALS(11).
CAUTION: The surface of the crank housing may
become hot during use, so allow it to cool
before moving. Read the cautions posted
on the
Folding Upper & Lower Body Cycle
.
Caution Decal
(both sides)
LOAD ADJUSTMENT
To increase the intensity of your workout, turn the ADJUSTMENT KNOB(14) clockwise.
To decrease the resistance, turn the ADJUSTMENT KNOB(14) counterclockwise.
To Next Page
Loading...
