Stamina inTONE Plus - Assembly Instructions

ASSEMBLY INSTRUCTIONS
6
1. ALWAYS USE TWO OR MORE STRONG PEOPLE TO UNFOLD OR FOLD THE inTONE®
REBOUNDER. FAILURE TO USE TWO OR MORE STRONG PEOPLE MAY ALLOW THE
RAILS TO SPRING BACK INTO THE FOLDED POSITION AND STRIKE SOMEONE WHICH
CAN CAUSE SERIOUS BODILY INJURY OR DEATH.
2. Keep children away from the inTONE® Rebounder during assembly.
3.KeepngersawayfromtheendsoftherailsinthehingeareawhenunfoldingtheinTONE®
Rebounder. The inTONE® Rebounder will snap into the unfolded position. Serious injury
canoccurifngersarecaughtbetweentheendsoftheRAILS.
4. The SAFETY PAD(6) must be installed before using the inTONE® Rebounder.
1.
STEP 1
Lay the trampoline on the oor. The trampoline will appear as shown in illustration 1.
NOTE :
BEFORE assembly, verify that the SECURE
PINS(10) are properly inserted into the Frame
Rail. The two protrusions must be assembled
inside the Frame Rail as shown in the SECTION
VIEW of the illustration. Otherwise, it could
damage the SECURE PINS(10) during Assembly
Step 2.
Frame Rail
Secure Pin
Secure Pin
SECTION VIEW
!
WARNING
Place all parts from the box in a cleared area and position them on the oor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com under the Service section and order the part needed,
e-mail us at customerservice@staminaproducts.com, or call us toll free at 1-800-375-7520 (in the
U.S.). Our Customer Service Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central
Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.