Need help?Do you have a question about the STAMOS S-LS-118 and is the answer not in the manual?
General| Input Voltage | 230 V |
|---|---|
| Frequency | 50/60 Hz |
| Open circuit voltage | 56 V |
| Welding Current MMA | 20 - 180 A |
| Welding Current TIG | 10 - 180 A |
| Welding Current Range | 10 - 180 A |
| Operating cycle | 60 % |
| Welding current at 60% duty cycle | 180 A |
| Electrode diameter (MMA) | 1.6 - 4 mm |
| Housing protection | IP21S |
| Protection Class | I |
| Insulation class | F |
| Efficiency | 85% |
| Weight | 8.3 kg |
| Type | Inverter |
| Welding Process | MMA, TIG |
| Electrode Diameter Range | 1.6 - 4 mm |
Product name, model, and input rating details including power, voltage, and current.
Specifications for CC, CV, CR, and CW modes, including range, resolution, and accuracy.
Details on voltage, current, and power measurement, plus over-protection functions.
Information on input impedance, weight, and device dimensions (W*D*H).
Overview of the manual's purpose and the device's design and compliance with standards.
Explanation of safety symbols, warnings, and important usage notes for the device.
Guidelines for safe electrical connections, handling, and preventing electric shock.
Safety measures for using the device in various workplace environments and hazard avoidance.
Recommendations for operator well-being, including avoiding use when impaired or distracted.
Best practices for operating the device safely, including avoiding overload and proper storage.
Details the device's intended purpose, application areas, and environmental operating conditions.
Instructions for using static operational modes: CC, CV, CW, CR, and the SHORT function.
Guides on performing dynamic tests including CC, CV, CW, CR, PL, and RL modes.
Procedures for setting up and executing sequential current changes.
Instructions for setting up and performing battery tests based on defined parameters.
Steps for performing VI curve measurements and analyzing results.
Guidance on configuring and executing Over Current Protection (OCP) tests.
Guidance on configuring and executing Over Power Protection (OPP) tests.
Instructions for measuring and analyzing waveforms using the WAVE mode.
Configuration options for system settings, communication, buzzer, and external triggers.
How to import/export data, save real-time measurements, and manage files via USB.
Instructions for cleaning, maintaining, and ensuring the longevity of the device.
To Next Page
