Standard Furniture OMAHA GRAY DR 16680 User Manual

STANDARD
furniture
ASSEMBLY INSTRUCTION
GROUP NO.: 16680 OMAHA GRAY DR
ITEM NO.: 16696 - COUNTER HEIGHT TRESTLE TABLE W/2-13 FILLS
Read instruction carefully prior to assembly.
Thank you for purchasing this quality product. Check carefully for small parts which may come loose during shipment. Remove all
components from pack and place top down on soft surface such as carpet or cloth to prevent scratching the finish. Identify and count all parts
as specified below.
It is recommended to use two or more people during the assembly process.
HARDWARE LIST:
PART LIST:
No.
Description Sketch
Size
Qty'
1
Long Bolt
F
5
16
'' x 60 mm
4 pcs
2
Short Bolt
F
1
4
'' x 40 mm
2 pcs
3
Lock Washer
F
5
16
'' x 13 mm
6 pcs
4
Flat Washer
F
5
16
'' x 19 mm
6 pcs
5
Short Screw
F4 mm x 30 mm
12 pcs
6 Long Screw
F4 mm x 60 mm
4 pcs
7
Allen Key
4 mm
1 pc
No.
Description Sketch
Qty'
A
Table Leg A
2 pcs
sticker stick under Leg
A
B
sticker stick under Leg
B
Table Leg B
2 pcs
C
Side Stretcher
2 pcs
D
Center Stretcher
2 pcs
E
Mounting Plate
1 pc
F
Table Top
1 pc
A
B
B
C
C
6
Step 1
Step 1: Attach the Side Stretcher (C) to the middle of Table
Leg A (A) and Table Leg B (B) by using Long Screw (6),
tighten with Phillips screw drivers (not included).
A
B
A
B
E
Step 2
7
1
3
4
C
C
Step 3
Step 4
Wood Dowel
7
2
3
4
5
A
B
D
A
B
C
C
E
E
D
D
A
B
Step 4: Place the Table Top (F) upside down on a piece of cloth
or carpet to prevent finish from scratching. Align pre-drilled hole
on the Mounting Plate (E) to the Wood Dowel on the table slide.
Attach the assembly base in Step 4 to the Table Top (1) by using
Short Screw (5) and fully tighten with Phillips screw drivers (not
included).
5
A
B
B
A
D
C
C
E
F
Wood Dowel
The pre-drill
hole
G
Table Leaf
2 pcs
Step 2: Attach the Table Legs are assembled in Step 1 to
Mounting Plate (E) by using Flat Washer (4), Lock Washer (3),
Long Bolt (1) and tighten with Allen Key (7).
Step 3: Attach the Center Stretcher (D) to the Side Stretcher (C)
by aligning the wood dowels to the pre-drilled holes on the Side
Stretcher (C) and tighten with Short Screw (5) by using Phillips
screw drivers (not included).
Attach the Center Stretcher (D) to the Mounting Plate (E) by
using Flat Washer (4), Lock Washer (3), Short Bolt (2) and
tighten with Allen Key (7).

Standard Furniture OMAHA GRAY DR 16680 Specifications

General

Brand	Standard Furniture
Model	OMAHA GRAY DR 16680
Category	Indoor Furnishing
Language	English

Summary

Product Assembly Instructions

Step 1: Attach Side Stretchers

Attach side stretchers to table legs using long screws, tightening with Phillips screwdrivers.

Step 2: Attach Legs Assembly to Mounting Plate

Secure assembled table legs to the mounting plate using long bolts and washers, tightening with Allen key.

Step 3: Attach Center Stretcher

Connect center stretcher to side stretchers and mounting plate using wood dowels and screws.

Step 4: Attach Table Top

Place table top upside down and attach the base assembly using short screws.

Step 5: Insert and Secure Table Leaf

Unlock, open table top, insert table leaf, close, and lock the latch.

Step 6: Assembly Completion

Final step confirming that the product assembly is now completed.