Standard 67046 User Manual (English)

To Next Page

Installation Instruction

Temporary Work Light

150 W LED Temporary High Bay

Read the installation instructions and all product labels before proceeding with the installation. This product must

be installed in full accordance with applicable electrical and building codes.

SAFETY WARNINGS

•Toreducetheriskofreandelectricalshock,donotexceedthemaximumwattage,includinganyadditional

string loads.

• Suitable for use in damp locations.

• Do not submerse.

•Fourunitsmaximumcanbedaisychained.

• Do not connect or disconnect when wet.

• Do not open – no user serviceable inside.

•Thisdeviceisnotintendedforusewithemergencyexitxturesoremergencyexitlights.

• Operating Temperature: -30°C / -22°F to 40°C / 104°F

•5yearlimitedwarranty.

PRODUCT SPECIFICATIONS

Voltage 120 V

Wattage 150 W

Light Output 15 000 lm

Power cord length 20 ft (6.1 m)

Wire 18 AWG

CRI 80

Amperage 1.3 A

IP Rating IP54

TO PREVENT ELECTRICAL SHOCK, POWER SHOULD BE TURNED OFF FROM THE ELECTRICAL PANEL BEFORE INSTALLATION

OR MAINTENANCE.

Need help?

Do you have a question about the Standard 67046 and is the answer not in the manual?

Standard 67046 Specifications

General

Crucial safety guidelines to prevent fire, electrical shock, and ensure proper usage and environmental conditions.

Key technical details including voltage, wattage, light output, cord length, wire gauge, CRI, amperage, and IP rating.

Step-by-step instructions for hanging, securing with a safety rope, and connecting multiple luminaires.