Need help?Do you have a question about the Standard C108 and is the answer not in the manual?
General| Brand | Standard |
|---|---|
| Model | C108 |
| Category | Transceiver |
| Language | English |
Ensures the transceiver operates solely on batteries and within the specified voltage range for safety.
Advises against disassembling the transceiver and warns against touching internal components.
Stresses the importance of attaching the antenna before transmission to prevent transceiver damage.
Step-by-step instructions for connecting the accessory antenna to the transceiver's antenna terminal.
Guide on how to correctly insert AA-size batteries or a rechargeable battery pack into the transceiver.
Explains how to turn the transceiver on/off and adjust the volume level using the designated controls.
Details the use of the rotary channel selector to change the communication frequency up or down.
Outlines the procedure for transmitting, including checking for clear frequency and pressing the PTT switch.
Describes the different types of beep sounds emitted by the transceiver to confirm key operations.
Explains the VFO, Memory, CALL, and SET modes of the transceiver for user comprehension.
Details the functions of each key on the transceiver, including POWER, LAMP, SET, MONI, CALL, SC, and V/M keys.
Describes how to navigate and select various functions available within the transceiver's SET mode.
Identifies and explains the function of components located on the top and front of the transceiver.
Explains the various indicators and symbols displayed on the transceiver's LCD screen.
Introduces the concept of repeater operation and its importance for extending communication range.
Details the automatic activation of repeater mode for the C408 model at specific frequencies.
Guides on how to enable or disable the repeater mode on the transceiver.
Explains how to configure the frequency offset required for repeater communications.
Instructions for setting a specific tone frequency, available for the C108A model, for repeater communication.
Describes how to reverse transmit and receive frequencies for repeater applications.
Explains how to send a 1,750 Hz tone burst signal using the CALL key.
Explains the capability to memorize up to 20 communication frequencies and related settings.
Step-by-step guide on how to store a communication frequency into a memory channel.
Instructions on how to recall stored frequencies from memory channels.
Describes the procedure to erase stored information from a memory channel.
Introduces the two main types of scanning: pause scan and busy scan.
Details various methods for scanning, including 1 MHz, program, and memory scans.
Explains how to activate and use the CALL frequency function.
Guides on how to set a new frequency for the CALL function.
Lists the available frequency combinations for dual watch monitoring.
Explains the procedures for setting up dual watch between different frequency types.
Instructions on how to stop the dual watch monitoring operation.
Explains how to change the display from memory address to channel number format.
Instructions for enabling or disabling the key lock feature to prevent accidental operation.
Guides on how to activate or deactivate the PTT button lock to prevent erroneous transmissions.
Details how to change the squelch sensitivity between High and Low settings.
Explains how to modify the MONI key function for continuous squelch opening.
Instructions for changing the frequency step increment when using the rotary channel selector.
Describes how to enable a mode where the lamp stays on or off with a single key press.
Explains how to activate the automatic power-off feature to conserve battery life.
Details how to allow the rotary channel selector to function even when the key lock is active.
Guides on how to enable or disable the audible beep sound for key operations.
Instructions for turning the auto repeater function on or off for the C408 model.
Explains how to copy a memorized frequency to the VFO for slight adjustments.
Provides overall technical details including frequency range, transmission type, and physical dimensions.
Lists technical performance parameters for the transceiver's receiver section.
Details the technical performance parameters of the transceiver's transmitter section.
To Next Page
