14 15
PIC. 10
The configuration of tools and accessories can be varied to suit your
particular requirements. A basic recommended set up is shown in
Pic.10
When you have finished using your air compressor follow
these simple steps:
1. Turn your air compressor OFF, using the
ON/OFF button.
2. Turn the power point OFF and disconnect the
power lead.
3. Disconnect your air tools and air hose.
4. Clean your air hose and air tools.
5. Store your air hose and air tools in a secure well ventilated
cabinet.
6. Slowly open the tank drain tap, see page 16.
This allows excess air and moisture, water,
to vent.
7. Leave the tank drain tap open. This allows any moisture to drain
while the air compressor
is stored.
To Next Page
Loading...
