To Next PageTo Next Page
Need help?Do you have a question about the Stanley FATMAX J7CS and is the answer not in the manual?
General| Brand | Stanley |
|---|---|
| Model | FATMAX J7CS |
| Category | Air Compressor |
| Language | English |
Peak battery amps and instant starting amps specifications.
Details the maintenance-free, sealed, 12-volt DC lead-acid battery type.
Specifies the maximum pressure output for the air compressor function.
Details the specifications for the USB power ports, including voltage and total amperage.
Controls the USB power ports, turning them on or off.
Ports for charging or powering USB-based electronic devices.
An indicator light for the USB power ports.
LEDs that display the current charge level of the unit's battery.
Alerts the user if the jumper clamps are connected incorrectly.
Main power switch for engaging the jump-starting function.
Button to control the built-in LED area light.
A versatile LED light for illuminating work areas.
Button to check the battery's charge status.
Port for recharging the unit using a 120V AC adapter.
Gauge to monitor air pressure when using the compressor.
The positive terminal clamp for jump-starting.
Hose and connector for the air compressor function.
Switch to turn the air compressor function on or off.
The negative terminal clamp for jump-starting.
Adapter used to recharge the unit from a 120V AC outlet.
Adapter for connecting various nozzles to the air hose.
Explains the meaning of danger, warning, caution, and notice symbols.
Provides essential safety precautions for using the unit.
Guidelines for safely charging the jump starter unit.
Recommendations for using extension cords with the unit.
Critical safety advice for jump-starting vehicles.
Safety precautions related to the air compressor function.
Safety advice for using the USB ports.
Congratulates the user and advises reading the manual.
Instructions and recommendations for charging the unit's battery.
Detailed steps for recharging the unit with the AC adapter.
Steps for using the jump-starter function to start a vehicle.
Step-by-step guide for jump-starting vehicles with negative ground systems.
Instructions for jump-starting vehicles with positive ground systems.
Instructions on how to use the USB power ports.
Instructions for using the built-in area light.
Instructions for using the built-in air compressor.
Steps for inflating tires using the compressor.
Steps for inflating items without valve stems using the compressor.
Guidelines for maintaining the unit and its battery.
Information on proper disposal of the lead-acid battery.
Common issues and solutions for the unit.
Troubleshooting steps if the unit fails to charge.
Troubleshooting steps if the jump-starter function does not work.
Troubleshooting steps if the compressor does not inflate.
Troubleshooting steps for issues with USB power ports.
Troubleshooting steps if the LED area light fails to activate.
Information on recommended accessories.
Details the product's one-year limited warranty.
Summary of key technical specifications for the unit.
