G
B
2. LAYOUT (Fig. 1)
3. SCOPE OF USE
The compressor is designed for generating compressed
Please note that our equipment has not been designed
Our warranty will be voided if the machine is used
in commercial, trade or industrial businesses or for
operator and not the manufacturer will be liable for any
4. POINTS TO NOTE WHEN SETTING
UP THE COMPRESSOR
Report any damage immediately to the company
The compressor may only be used in suitable rooms
It is prohibited to use the compressor in areas where
5. ASSEMBLY AND STARTING
Warning!
You must fully assemble the appliance before
using it for the first time.
5.1 Fitting the wheels (Fig. 3, 4 & 5)
●
Assembly by sequence: a, b, c, d, e
●
●
5.2 Fitting the supporting foot (ref. 4)
5.3 Voltage
The compressor is equipped with a mains cable with
the mains voltage complies with the specifications on
5.3.1 Connection of the mains plug (electrical
information for the BS plug)
Important!
The wires in the mains lead fitted to this product are
● This productis doubleinsulated andtherefore
does not require a connection to earth.
● The3pinplugmustcomplytoBS1363/A.
● FusemustcomplytoBS1362.
requires replacement it must be wired in accordance
with the following instruction:
Do not connect the brown (live) or blue (neutral) to
the earth pin marked ‘E’ on the 3 pin plug.
Connect the Blue wire to the terminal marked Neutral
the cord grip and that the wires are not trapped when
If in doubt consult a qualified electrician
To Next Page
Loading...
