ENGLISH
49
may result in electric shock, fire and/or
seriousinjury.
• The provided USB cable is not intended for any
uses other than charging rechargeable tools
with micro USB ports. Charging other types of
tools may cause their batteries to overheat and
burst, resulting in personal injury, property
damage, fire, electric shock orelectrocution.
• Use only with the Listed/Certified Information
Technology (computer)Equipment.
• DO NOT expose USB cable to water, rain orsnow.
• Pull by the plugs rather than the cord when
disconnecting the USB cable. This will reduce the
risk of damage to the plugs andcord.
• Make sure that the cord is located so that it will
not be stepped on, tripped over or otherwise
subjected to damage orstress.
• DO NOT use a USB cable with a damaged cord
orplugs. Have them replacedimmediately.
• Foreign materials of a conductive nature, such
as, but not limited to, grinding dust, metal chips,
steel wool, aluminum foil or any buildup of
metallic particles should be kept away from the
USB and micro USB plugs and port.
• Always unplug the USB cable from the power
supply when there is no tool attached toit.
State of Charge Indications
Before use ensure the battery is fullycharged.
GREEN 75‑100% charge
YELLOW 15‑74% charge
RED < 15% charge