Stanley FATMAX FMHT66719 - Tool Markings and Maintenance; Markings on Tool; Cleaning

ENGLISH
50
Flashing RED
or
no illumination
Low battery. Tool will need to
berecharged.
Markings on Tool
The following pictograms are shown on the tool:
a
Read instruction manual beforeuse.
f
Wear eyeprotection.
n
Visible radiation. Do not stare intolight.
MAINTENANCE

WARNING: To reduce the risk of serious
personal injury, keep away from the
forward and reverse buttons while making
any adjustments or removing/installing
attachments or accessories. An accidental
start‑up can causeinjury.
D
Cleaning

WARNING: Blow dirt and dust out of the main
housing with dry air as often as dirt is seen
collecting in and around the air vents. Wear
approved eye protection and approved dust
mask when performing thisprocedure.

WARNING: Never use solvents or other harsh
chemicals for cleaning the non‑metallic parts
of the tool. These chemicals may weaken