Stanley Fatmax FMHT77356 - Page 4

4
User Manual
GB
Contents
• User Safety
• Contents
• Product Overview
• Keypad, Modes, and LED
• Applications
• Batteries, Safety and Power
• Power Supply Operation and Safety
• Set Up
• Operation
• Accuracy Check and Calibration
• 
Retain all sections of the manual for future
reference.
User Safety
WARNING:
Read all safety warnings and instructions
included in the Safety Instructions and
User Manuals before using this product.
Failure to follow the warnings and instructions

serious injury.”The person responsible for
the instrument must ensure that all users
understand and adhere to these instructions.
CAUTION
Use of controls or adjustments or performance

herein may result in hazardous radiation
exposure.
WARNING:
The following labels are placed on the laser
tool to inform you of the laser class for your
convenience and safety.

WARNING: LASER RADIATION. DO
NOT STARE INTO BEAM. CLASS 2 LASER
PRODUCT.
CAUTION:
While the laser tool is in operation, be careful
not to expose your eyes to the emitting

extended time may be hazardous to your eyes.
CAUTION:
Glasses may be supplied in some of the laser


visibility of the beam in brighter environments
or at greater distances from laser source.
WARNING There are no user serviceable parts
inside. Do not attempt repairs. Return the
product to your local service center for
assistance.
WARNING To reduce the risk of injury, user
must read the Product User manual, Laser
Safety and Battery Safety manuals.
CAUTION-Recycle per your local regulations
for Li- Ion batteries or return the product to
your local service center
2INR19/66
Li-ion
≤1.5mW @ 630-680nm
IEC 60825-1: 2014
Complies with 21 CFR
1040.10 and 1040.11 except
for deviations pursuant to Laser
Notice No. 50, dated June 24, 2007.
FMHT77357
www.stanleylasers.com
www.stanleytools.eu
TYPE 1 7.2V DC 2.0Ah 14.4Wh
2INR19/66
Li-ion
www.stanleytools.eu
www.stanleylasers.com
TYPE 1
7.2V DC 2.0Ah 14.4Wh
FMHT77356
≤1.5mW @ 510-530nm
IEC 60825-1: 2014
Complies with 21 CFR
1040.10 and 1040.11 except
for deviations pursuant to Laser
Notice No. 50, dated June 24, 2007.
Li-ion
2INR19/66