Product Overview
Laser Tool
2. Keypad Switch
3.
4. DC Power supply jack
Label
Laser Modes
7.
Beam Activation Key
9. Pulse Mode Activation Key
Beam Options
Horizontal Beam Scan Direction Accuracy
Horizontal Beam Pitch Direction Accuracy
Vertical Beam Accuracy
Vertical Beam 90° Accuracy
Power /Pendulum Lock Switch (Fig B)
On
Power OFF/Pendulum lock on
•
unlocked position
• To turn the laser tool OFF, move switch to the locked
position
Modes
Laser Beam Available Modes.
• The pendulum lock on the laser tool needs to be
Out of Level (Fig B)
• If the laser has been tilted > 4° then it cannot
Pulse mode ON/OFF key
)
Press to activate Pulse mode.
LED OFF
2.
RED
3.
initial state set.)
Battery level indicator key
)
Battery Life LED
LED OFF
3. Battery needs recharging. Laser Beams shut off.
To Next Page
Loading...
