Stanley Fatmax TLM165S - Distances to 2 Points; Measuring Partial Height; Measuring Height of Obstructed Object

17
GB
Distances to 2 Points
You can use the distance to two points on a wall
or object (Double Indirect Height) to determine its
height (Figure P ).
1.
Point the tool's laser (Figure
A 1
) toward a wall
or object, and not toward anyone's eyes.
2.
Press (Figure
A 3
) to turn the tool on and
display the red laser dot.
3.
Make sure the tool position setting (Figure
E 4
)
is correct for taking the measurement.
4.
If is not already displayed as the current
function (Figure
E 5
), click the current function
icon and then select from the list of functions
(Figure
G 2
).
5.
Position the tool opposite the approximate
center of the vertical height to be measured
(Figure
P 1 ).
6.
Point the laser toward the lowest point of the
building or object whose height you need to
measure (Figure
P 1
).
7.
Press to measure the distance.
8.
From the same point, aim the laser at the
highest point of the building or object
(Figure
P
2 ).
9.
Press to measure the distance.
10.
On the bottom line of the screen, view the height
of the building or object (Figure
P
3 ).
Measuring Partial Height
If you need to determine the height of a section of
a wall or object (e.g., the distance from the ceiling to
the top of TV or window on the wall) (Figure
Q
).
1.
Point the tool's laser (Figure
A 1
) toward a wall
or object, and not toward anyone's eyes.
2.
Press (Figure
A 3
) to turn the tool on and
display the red laser dot.
3.
Make sure the tool position setting (Figure
E 4
)
is correct for taking the measurement.
4.
If is not already displayed as the current
function (Figure
E 5
), click the current function
icon and then select from the list of functions
(Figure
G 2
).
5.
Point the laser at the highest point of the wall or
object (Figure
Q
1
).
6.
Press to measure the distance to the top of
the object.
7.
From the same point, aim the laser at the top
of the obstruction (TV, window, etc.) on the wall
or object (Figure
Q
2
).
8.
Press to measure the distance from the top
of the wall to the obstruction.
9.
From the same point, aim the laser on
a horizontal line straight ahead toward the
bottom of the wall (Figure
Q 3
).
10.
Press to measure the distance.
11.
On the bottom line of the screen, view the
distance between the top of the wall and the top
of the obstruction on the wall (Figure
Q
4 ).
Measuring Height of Obstructed Object
Follow these steps to determine the height of a tall
building or object that is blocked by other buildings
or objects (Figure
R
).
1.
Point the tool's laser (Figure A 1 ) toward a wall
or object, and not toward anyone's eyes.
2.
Press (Figure
A 3
) to turn the tool on and
display the red laser dot.
3.
Make sure the tool position setting (Figure
E 4
)
is correct for taking the measurement.
4.
If is not already displayed as the current
function (Figure
E 5
), click the current function
icon and then select from the list of functions
(Figure
G 3
).
5.
Point the laser at the highest point of the
building, wall, or object (Figure
R
1
).
6.
Press to take the measurement.
7.
On the bottom line of the screen, view the height
of the building or object (Figure R
2
).