Stanley Fatmax TLM165S - Using the Tool With; STANLEY Smart Connect Application

19
GB
5.
Position the tool at the angle to be measured
(Figure
V
1
).
6.
Press to take the measurement.
7.
If you are measuring an angle that is at
a distance (e.g., overhead), click to lock the
measurement on the screen before you move the
tool.
8.
Before using the tool again, click to unlock the
measurement (Figure
V
2
).
Using the Tool as a Level
1.
Point the tool's laser (Figure
A 1
) toward a wall
or object, and not toward anyone's eyes.
2.
Press (Figure
A 3
) to turn the tool on and
display the red laser dot.
3.
If is not already displayed as the current
function (Figure
C 5
), click the current function
icon and then select from the list of
functions.
4.
Place the tool in the vertical or horizontal position
on the surface that you want to check is level.
5.
On the tool's screen, view the position of the white
bubble on the vial (Figure
T
).
Using the Tool With
You can use the Bluetooth
®
capability of
your TLM165S, TLM165SI, or TLM330S to pair it
with the STANLEY
®
Smart Connect™ application
on your cell phone or tablet, and then record your
measurements on your floor plans or room photos.
1.
From either or , download
the STANLEY
®
Smart Connect™ application to
your cell phone or tablet.
2.
Using the STANLEY
®
Smart Connect™
application, capture the room or space for which
you want to record the measurements (either build
a floor plan or take room photos).
3.
On the keypad, press to turn on the tool.
4.
If the Bluetooth
®
icon does not appear on the
screen (Figure
C 2
), click and then to
turn on the Bluetooth
®
connection.
5.
Use the STANLEY
®
Smart Connect™ application
to pair your cell phone or tablet to the tool.
6.
Use the tool to measure each wall in the room
or space captured in the floor plan, and sync
the measurements to the floor plan, or enter the
measurements on the room photos.
7.
Using the STANLEY
®
Smart Connect™
application, save the floor plan or the marked up
photos.
Once you have saved the floor plan or marked up
photos, you can print them or email them to other
people (your realtor, home center, etc.).
THE BLUETOOTH® WORD MARK AND LOGOS ARE
REGISTERED TRADEMARKS OWNED BY BLUETOOTH SIG,
INC. AND ANY USE OF SUCH MARKS BY STANLEY TOOLS
IS UNDER LICENSE. APPLE AND THE APPLE LOGO ARE
TRADEMARKS OF APPLE INC., REGISTERED IN THE U.S.
AND OTHER COUNTRIES. APP STORE IS A SERVICE MARK
OF APPLE INC., REGISTERED IN THE U.S. AND OTHER
COUNTRIES. GOOGLE PLAY AND THE GOOGLE PLAY LOGO
ARE TRADEMARKS OF GOOGLE INC.
Viewing the Tool's Memory
Up to the last 20 measurements are stored in the
tool's memory.
1.
If is not already displayed as the current
function (Figure
E 5
), click the current function
icon and then select from the list of functions
(Figure
G
3
).
2.
View the last measurement that was taken. Click
to scroll through all the measurements that
have been stored in the tool's memory (up to 20).
Click to scroll back.