Need help?Do you have a question about the Stanley FG10 and is the answer not in the manual?
Warns about chemicals in dust created by power sanding, sawing, grinding, and drilling.
Details critical safety information on DANGER and IMPORTANT tags attached to the tool.
Describes three types of hydraulic hoses and their properties for use with the tool.
Information regarding DANGER tags attached to hydraulic hoses and their importance.
Chart detailing recommended hose diameters and lengths based on oil flow and length.
Specifies flow range, pressure, temperature, and filtration for HTMA hydraulic systems.
Outlines EHTMA requirements and classifications for hydraulic systems, including flow and pressure.
Steps to check hydraulic power source, tool condition, trigger, and guard before operation.
Instructions for safely installing and removing grinding wheels, including specifications.
Details how to adjust wheel pivots for frog and point grinding operations.
Explains the procedure for grinding the point of a frog using the grinder.
Describes the process of profile grinding of rail using the grinder.
Instructions on how to attach and use the extension assembly.
Steps for properly connecting hydraulic hoses to the tool and power source.
Step-by-step guide for starting and operating the grinder, including safety checks.
Guidance on operating the grinder in cold weather conditions to prevent damage.
Details regular greasing of assemblies, spindle/flange inspection, and hose/fitting checks.
Advises on coupler care, storage, hose connection, and using genuine parts for protection.
Addresses causes and solutions for the grinder not running or operating too slow.
Explains potential causes and solutions when the grinder operates too fast.
Presents measured sound power, sound pressure, and vibration emission values.
Lists available accessories for the grinder, such as cup stones.
Displays exploded views of FG10/PG05 grinder components and specific assemblies.
Illustrates extension assembly, hydraulic circuit, and notes PG05 model differences.
Lists parts for the spark guard assembly and shows an illustration of inner guard components.
To Next Page
General