To Next PageTo Next Page
Need help?Do you have a question about the Stanley FMC640 FatMAX and is the answer not in the manual?
General| Voltage | 18 V |
|---|---|
| Max Torque | 180 Nm |
| No Load Speed | 0-2900 RPM |
| Impact Rate | 0-3100 IPM |
| Weight | 1.1 kg |
| Blows Per Minute (BPM) | 3, 600 BPM |
| Chuck Size | 6.35 mm |
Defines DANGER, WARNING, CAUTION, NOTICE symbols for hazard recognition.
Provides fundamental safety rules for operating power tools.
Guidelines for holding, securing, and operating the tool safely to prevent accidents.
Recommends wearing safety glasses, hearing protection, and dust masks for user safety.
Warns about construction dust and necessary precautions to reduce exposure risks.
Explains the meaning of various symbols found on the tool's label.
Lists catalog numbers and identifies components of the impact driver and its accessories.
Essential safety guidelines for the proper and safe use of battery chargers.
Crucial safety information for handling, using, and storing battery packs.
Recommendations for storing battery packs to maintain their condition and longevity.
Step-by-step instructions for charging the battery pack using the provided charger.
Explains LED indicators, troubleshooting, and best practices for optimal battery charging.
Instructions for inserting and detaching the battery pack from the tool.
Explains how to use the variable speed trigger for controlled operation and speed selection.
How to change tool direction and lock the trigger using the control button.
Explains the LED worklight and how to use the quick-release chuck for accessories.
Locates and describes the built-in bit storage slot on the tool.
Addresses common problems like unit not starting, battery not charging, or abrupt shutoff.
Special considerations for lithium batteries and instructions for cleaning the tool.
Information on ordering parts, obtaining service, and recommended accessories.
Details on the three-year limited warranty and how to replace warning labels.
