To Next PageTo Next Page
Need help?Do you have a question about the Stanley HP1 and is the answer not in the manual?
Covers safe work areas, training, PPE, operation without supervision, and general handling.
Details PPE, engine exhaust, fueling, flammable, proximity, cooling, and authorized service.
Explains the meaning and purpose of DANGER, WARNING, and IMPORTANT safety symbols.
Details warnings for hydraulic hose use, pressure limits, connections, and handling to prevent injury.
Covers cautions for operating the pump without water and instructions from safety tags and stickers.
Details authorized hydraulic hose types: certified non-conductive, wire-braided, and fabric-braided.
Defines the required pressure rating for hydraulic hose relative to the system relief valve.
Instructions for preparing the unit, including checking oil, fuel, hydraulic fluid, battery, and connections.
Explains the operation of the throttle control and its three operating modes: AUTO, 5, and 8.
Step-by-step guide for starting the power unit, including throttle and circuit control.
Procedures for starting the unit in cold weather, focusing on fluid circulation.
Instructions for operating the connected hydraulic tool, including throttle activation.
Steps for safely shutting down the power unit after use.
Notes regarding the optional water pump kit and its operation.
Covers scheduled maintenance for the engine, including air filters, fuel filter, and oil changes.
Procedures for checking hydraulic fluid, removing moisture, and changing the filter.
Guidelines for cleaning and storing the power unit, including fuel additives and oil.
General
