Stanley IntelliSensor Pro - Page 2

IntelliSensor™
Pro (77-255)
The Stanley® Intel liSensor™ Pro uses
electronic signals to locate the position
of studs, joists or live AC wires through
drywall and other common wall
materials. Once the edge of the stud has
been detected, the IntelliSensor™ Pro
LCD display gives visual and audio
indications that allow you to easily
pinpoint the stud's edge position. A
pencil line allows you to quickly note the
location of the stud edges.
The IntelliSensor™ Pro allows the user
to locate wood and metal studs up to
38 mm (1-1/2").
The IntelliSensor™ Pro provides
automatic calibration, auto shut off
and heavy duty ABS construction.
Depth detection selected by side button
for 1/2" (12 mm), 1" (25 mm) and 1-1/2"
(38 mm).
Important: Read all instructions prior to
operating the IntelliSensor™ Pro and DD
NDT remove any labels from the tool.