Need help?Do you have a question about the Stanley IntelliSensor Pro and is the answer not in the manual?
General| Type | Motion Sensor |
|---|---|
| Material | Plastic |
| Power Source | Battery |
| Operating Temperature | -10°C to 50°C |
| Mounting Options | Wall mount |
Instructions for replacing the 9-volt battery in the stud finder.
Guidelines for calibrating the unit, including the calibration cycle steps.
Steps to choose the desired detection depth (1/2", 1", 1-1/2") using the ON button.
Step-by-step guide for locating wood studs, their edges, and center.
Explanation of LED and LCD indicators for live wire proximity and detection.
How static affects detection and tips for improving wire location accuracy.
Warnings regarding shielded wires, metal conduits, and turning off power.
Advisories on caution during wall work and handling live wires.
Information on typical stud/joist dimensions for anticipating their presence.
Proper grip technique for accurate live wire detection.
How surface coverings and textures affect detection performance.
Details on accuracy, humidity, battery, shock resistance, and temperature.
Explanation of the one-year limited warranty, coverage, and exclusions.
Address for sending products for warranty service.
Mandate to wear safety goggles when operating the tool.
To Next Page
