16 ► IW16 User Manual
Drive Size .................................................................................................................................... 1-inch Square Drive
Weight ......................................................................................................................................................26 lbs/12 kg
Overall Length ................................................................................................................................ 14-1/2-inch/37 cm
Width .......................................................................................................................................................4-inch/11 cm
Pressure Range................................................................................................................1500-2000 psi/105-140 bar
Flow Range ..............................................................................................................................7-12 GPM/20-45 LPM
Optimum Flow .................................................................................................................................... 8 GPM/30 LPM
System Type ............................................................................................................Open Center, HTMA Type II or III
Porting ....................................................................................................................................................8 SAE O-ring
Output Speed (free spin) ................................................................................................ 2000 rpm at 5 GPM/19 LPM
Input Speed ......................................................................................................................... 1200 Impacts per Minute
Connect Size and Type ....................................................................................................3/8-inch Male Pipe Adapter
Torque...........................................................................................................................500–2500 ft. lb/680–3400 Nm
SOUND AND VIBRATION DECLARATION
Test conducted on IW16150.
Measured A-weighted sound power level, Lwa (ref. 1pW) in decibels 105.01 dBA
Uncertainty, Kwa, in decibels 3.39 dBA
Measured A-weighted sound pressure level, Lpa (ref. 20 µPa) at operator’s position,
in decibels
97.03 dBA
Uncertainty, Kpa, in decibels 3.39 dBA
Values determined according to noise test code given in EN ISO 15744, 11203 and 3744
Note: The sum of a measured noise emission value and its associated uncertainty represents an upper
boundary of the range of values which is likely to occur in measurements.
Measured vibration emission value: a (Trigger Handle) 62.2 m/sec²
Measured vibration emission value: a (Support Handle) 40 m/sec²
Uncertainty: K 13.4 m/sec²
Values determined according to ISO 28927-2
SPECIFICATIONS
To Next Page
Loading...
