Need help?Do you have a question about the Stanley Oneprox GS3-LF and is the answer not in the manual?
General| LED Indicator | Yes |
|---|---|
| Beeper | Yes |
| Power Supply | 5V DC |
| Interface | Wiegand, Clock-and-Data |
| Connectivity | Wiegand, Clock-and-Data |
Maps wire colors to their electrical functions and voltage.
Describes the meaning of LED indicators and sounder alerts.
Explains the default DIP switch configurations for output formats.
Details DIP switch settings for different card/token output types.
Configures Wiegand output formats using DIP switches.
Specific DIP switch settings for Wiegand 26, 34, and 74-bit outputs.
Configures reader beep when a token is presented.
Configures reader to be silent when a token is presented.
Steps for installing the tamper magnet and plug.
Instructions for connecting the flying lead.
Guidance on attaching the reader to the wall.
Guidelines for reader placement and surface effects.
Explains the tamper condition detection and alerts.
Specifies maximum cable lengths based on gauge for PAC controllers.
To Next Page
