Need help?Do you have a question about the Stanley PLUGBANK 6 and is the answer not in the manual?
General| Brand | Stanley |
|---|---|
| Model | PLUGBANK 6 |
| Category | Power Supply |
| Language | English |
Choose a suitable location and assemble the ground stake as shown in the manual.
Insert the assembled timer and ground stake into the ground, not exceeding 5.5 inches depth.
Plug the timer into a 3-prong GFCI outlet and ensure all outdoor devices use GFCI outlets.
Plug the timer into a GFCI outlet; the 'OFF' LED will illuminate, indicating devices should be powered on.
Press the button below LEDs to cycle through options; the selected option's LED will illuminate.
The 'ON' position instantly turns power on, while the 'OFF' position instantly turns power off.
Settings like 2HR, 4HR, etc., turn the unit ON at dusk and OFF after the selected countdown time daily.
The D/D setting turns the unit ON at dusk and OFF at dawn, repeating this cycle daily.
Plug devices directly into the timer and ensure they are set to 'ON' for proper timer control.
Not for permanent installation; use only with 15A max Christmas tree or seasonal lighting for max 90 days.
Do not exceed 140 screw-base lamps or 12 midget lamp strings. Total 1875 watts maximum.
Cord sets must be plugged into GFCI-protected receptacles. Maintain connector 6 inches above ground.
Do not splice, repair, or modify. Unplug when not in use. Keep out of reach of children.
Features 6 grounded outlets, rated 125VAC/60Hz/15A/1875W, with a 6ft AWG 14/3 SJTW power cord.
Details warranty terms for defects within the first three years from purchase date.
To Next Page
