3.7 Two-Speed Climbing Mode
1. The brakes automatically
brake when climber is pushed
to the edge of the steps.
This is added protection when
climbing. Lift the brakes
upward, brakes will start
working; Press the brake
downward, and the brake will
close.
2. Detection method: on flat
ground tilt the climber to brake
the wheels off the ground (As
shown in picture) If the climber
can pull back but wheels lock, the
brakes are working. If not the
brake have failed, do not use stair
climber.
One bar means slower climbing
mode, two bars results in faster
climbing mode.
3.8 U
P- Down Mode Switch
Switch up-down mode according
to the switch sign.
To Next Page
Loading...