5 - ENG
HAZARD
RISK OF HOT SURFACES
WHAT CAN HAPPEN HOW TO PREVENT IT
• Touching exposed metal such as the compressor
head, engine head, engine exhaust or outlet
tubes, can result in serious burns.
• Never touch any exposed metal parts on
compressor during or immediately after
operation. Compressor will remain hot for
several minutes after operation.
• Do not reach around protective shrouds or
attempt maintenance until unit has been
allowed to cool.
HAZARD
RISK FROM MOVING PARTS
WHAT CAN HAPPEN HOW TO PREVENT IT
• Moving parts such as the pulley, flywheel, and
belt can cause serious injury if they come into
contact with you or your clothing.
• Never operate the compressor with guards or
covers which are damaged or removed.
• Keep your hair, clothing, and gloves away from
moving parts. Loose clothes, jewelry, or long
hair can be caught in moving parts.
• Air vents may cover moving parts and should be
avoided as well.
• Attempting to operate compressor with
damaged or missing parts or attempting to
repair compressor with protective shrouds
removed can expose you to moving parts and
can result in serious injury.
• Any repairs required on this product should
be performed by authorized service center
personnel.
HAZARD
RISK OF UNSAFE OPERATION
WHAT CAN HAPPEN HOW TO PREVENT IT
• Unsafe op er a tion of your compressor could lead
to se ri ous in jury or death to you or others.
• Review and understand all instructions and
warnings in this manual.
• Be come fa mil iar with the op eration and controls
of the air compressor.
• Keep operating area clear of all persons, pets,
and obstacles.
• Keep chil dren away from the air compressor at
all times.
• Do not operate the product when fatigued or
under the influence of alcohol or drugs. Stay
alert at all times.
• Never defeat the safety features of this product.
• Equip area of operation with a fire extinguisher.
• Do not op er ate machine with missing, broken,
or un au tho rized parts.
• Never stand on the compressor.
To Next Page
Loading...
