Stanley STHT77341 - Page 10

10
STHT77341
Retain all sections of the manual for future reference.
User Safety
WARNING:
• CarefullyreadtheSafety Instructions and
Product Manual before using this product.
The person responsible for the instrument
must ensure that all users understand and
adhere to these instructions.
WARNING:
• The following labels are placed on the laser
tool to inform you of the laser class for your
convenience and safety. (Text has been
translated here for your convenience.)
IEC /EN 60825-1
LASER RADIATION - DO NOT
STARE INTO THE BEAM OR VIEW
DIRECTLY WITH
OPTICAL INSTRUMENTS
CLASS 1 LASER PRODUCT
Max Output ≤1 mW @ 630 - 670 nm
Complies with 21 CFR 1040.10 and 1040.11 except for
deviations pursuant to Laser Notice No. 50, dated June2007
CAUTION:
• While the laser tool is in operation, be
careful not to expose your eyes to the
emitting laser beam (red light source).
Exposure to a laser beam for an extended
time may be hazardous to your eyes.
CAUTION:
• Glasses may be supplied in some of the laser
tool kits. These are NOT certified safety
glasses. These glasses are ONLY used to
enhance the visibility of the beam in brighter
environments or at greater distances from
laser source.
Contents
• User Safety
• Contents
• Product Overview
• Keypad, Modes, and LED
• Applications
• Batteries and Power
• Set Up
• Operation
• Accuracy Check and Calibration
• Specifications
Product Overview
Figure A - Laser Tool
1. 1/4-20 threaded mount
2. Laser Window
3. Power /Pendulum Lock Switch
4. Slots for Quick Link Bracket Connect
5. LED/Out-of-Level Indicator
Figure B - Laser Tool Battery Location
6. 2 x AA Batteries
7. Battery Cover
Figure C - Power /Transport Lock
Figure D - Laser Modes
Figure E - Quick Link Bracket Assembly.
9. QuickLink Bracket
Figure F - Quick Link ™ Bracket Detail
Figure H - Level Beam Accuracy
Figure I - Horizontal Beam Accuracy
Figure J - Vertical Beam Accuracy
GB
Cross90 GB_STHT77341.indd 10 01/07/2013 09:50